A3SS-XT9 Double pump pump system_AlKEN SCREW PUMP & SYSTEM

1. Product overview:

A3SS-XT9 double pump pump system is composed of double high pressure screw pump structure, two pump sets can be used at the same time, or can be used alone, suitable for large flow conditions, such as high pressure for chip breaking and high pressure during processing Chip flushing, under this condition, the two pressure pumps can be turned on at the same time, and the chip flushing pump can stop working when the chip flushing is not required, which affects the chip breaking pump. There is a separate pressure regulating valve and high pressure filter at the outlet of the pump, and the pressure level below the selection can be adjusted arbitrarily during work . The purpose is to meet the output requirements of large flow.

2. Product use function:

The A3SS-XT9 dual-pump pump system is suitable for cooling, lubricating, flushing, chip breaking, and chip removal of the water outlet tools and workpieces in the center of the spindle, precision CNC machining technology or batch intelligent manufacturing processes, such as turning, milling, grinding, Deep hole drilling, milling and boring, etc .; A3SS-XT9 cabinet system is often used in CNC machining centers, deep hole drilling and milling compound machining centers, gear grinding machines, crankshaft grinders, turning, milling and boring compound machining centers, etc., especially in auto parts, wind power generation Machines and other precision manufacturing industries are used in batch processing of parts.

3.the scope of application :

A3SS-XT9 dual-pump pump system is often used for precise washing, cooling, lubrication, chip breaking and chip removal of workpieces and tools in auto parts manufacturing, precision machining manufacturing, and mass intelligent production lines, extending the service life of tools and improving batch zero Machining accuracy and surface quality of parts. It is loved by many precision machinery manufacturers such as various auto parts and wind turbines.

4.typical representative model meaning interpretation:

A3SS -025 /038-027/030-G-3-K-D4- B - T1 - XT9

A3SS -025 /038-026/050-G-4-K-D4- B - T1 - XT9

A3SS -025 /038-024/070-G-5.5-K-D4- B - T1 - XT9

A3SS -025 /050-036/030-G-3-K-D4- B - T1 - XT9

A3SS -025 /050-034/050-G-5.5-K-D4- B - T1 - XT9

A3SS -025 /050-032/070-G-7.5-K-D4- B - T1 - XT9

A3SS -025 /060-043/030-G-5-K-D4- B - T1 - XT9

A3SS -025 /060-040/050-G-5.5-K-D4- B - T1 - XT9

A3SS -025 /060-038/070-G-7.5-K-D4- B - T1 - XT9

...

Parts of the model are provided here, for more information, please consult AKP.

5. material configuration:

Part name	Material Material Code Name
screw	38CrMoAl, 16MnCrS5, etc. nitrided steel die steel
bushing	ceramics
pump body	QT200 QT250 QT450 Q235A
Bearing housing	QT450
end cap	QT450

6. Technical data and performance parameters:

flow	Capacity	10	Up to _	600	L/min
inlet pressure	Inlet pressure	ps	Up to _	7	Mpa
outlet pressure	Working Pressure _	pd	Up to _	3-15	Mpa
medium viscosity	Viscosity	V	Up to _	1-2 0 _	mm 2 /s
medium temperature	Fluid Temperature _	t	Up to _	80	°C
Rotating speed	Speed	n	Up to _	3 600	r/min
Filtration accuracy	Filter			5-50	μm
overall volume	Size	Max 22 00 x 1 8 00 x 1500			mm
control method	Control	PLC, terminal box, AKP control module

*The data here is for selection reference, if you have any questions, please consult A KP .

7. Advantages:

1. It can adapt to multi-station independent work of CNC machine tools;

2. The dual-pump system is equipped with an independent pressure regulating valve and an independent filter;

3. Double pump sets can work at the same time to achieve large flow ;

4. When processing small parts and tool water outlet with small flow and small flow, the double pump unit can work alone;

5. The open system is convenient for maintenance and repair;

6. Independent filtration system , convenient for maintenance and repair;

Keyword:

pressure

pump

chip

We could not find any corresponding parameters, please add them to the properties table

Longcheng Precision Forging customer site

The second workshop of Longcheng Precision Forging mainly produces engine injector bodies. The precision requirements of mass production parts are relatively high. After each shutdown, the engine must be warmed up for more than 20 minutes. The original site used a plunger pump system with a pressure of 70bar. Some models require a secondary pressurization of the cooling oil to reach the used 80bar. The original working noise is 150 decibels. Longcheng Precision Forging has reported that employees have been in noise pollution for a long time. The working environment is not conducive to the occupational health of employees. Kemet is required to replace the high-voltage unit, and the noise is controlled within 90 decibels. After contacting Kemet, our company provided a performance report and a noise level report. In August 2020, our company The performance and noise level of the central outlet high pressure unit were tested for the first time in Kmet. The test results show that the noise is 70 decibels, and the flow rate is 20 liters under the pressure of 80bar. The noise and performance are combined with the supply requirements.

More +

Longcheng Precision Forging customer site

The second workshop of Longcheng Precision Forging mainly produces engine injector bodies. The precision requirements of mass production parts are relatively high. After each shutdown, the engine must be warmed up for more than 20 minutes. The original site used a plunger pump system with a pressure of 70bar. Some models require a secondary pressurization of the cooling oil to reach the used 80bar. The original working noise is 150 decibels. Longcheng Precision Forging has reported that employees have been in noise pollution for a long time. The working environment is not conducive to the occupational health of employees. Kemet is required to replace the high-voltage unit, and the noise is controlled within 90 decibels. After contacting Kemet, our company provided a performance report and a noise level report. In August 2020, our company The performance and noise level of the central outlet high pressure unit were tested for the first time in Kmet. The test results show that the noise is 70 decibels, and the flow rate is 20 liters under the pressure of 80bar. The noise and performance are combined with the supply requirements.

More +

Products

High pressure machine tool cooling pump 

Spindle center water outlet system 

Lgnition oil pump 

Lubricating oil pump 

Other products 

Spare parts 

A3SS-XT9 Double pump pump system

1. Product overview:

2. Product use function:

3.the scope of application :

4.typical representative model meaning interpretation:

5. material configuration:

6. Technical data and performance parameters:

7. Advantages:

Central water filtration system

High pressure machine tool cooling pump

Machine tool cooling pump

High pressure screw pump