A3SS-XT7 double switching filter system

1. Product overview:

A3SS-XT7 double-switching filter system , dual-tank integrated design, comes with a lift pump that matches the flow rate of the high-pressure pump, three-stage liquid level controllers are installed in the two water tanks, and the No. 1 water tank controls the start-up and Stop, the No. 2 water tank controls the start and stop of the machine tool pump. The control method of the dual liquid level controller is relatively complex in working logic, but it can prevent the damage of the high pressure pump and the lift pump. The switchable filter for double-cylinder filtration can also be used for 24-hour non-stop work. Under normal working conditions, it is a single-cylinder filtration. Only when the filter element is replaced, it can be switched to another cylinder to work. The double-cylinder filtration can be used for a long time. The work depends on the filtration method of the filter element and the material of the filter element. When there are impurities in the filter cartridge, there will be an alarm light or an alarm signal, and there is no need to pay special attention and maintenance under normal use

2. Product use function:

A3SS-XT7 double switching filter system is suitable for cooling, lubricating, flushing, chip breaking and chip removal of tools and workpieces in the center of the spindle, precision CNC machining technology or batch intelligent manufacturing processes, such as turning, milling, grinding, deep Hole drilling, milling and boring, etc .; A3SS-XT7 cabinet system is often used in CNC machining centers, deep hole drilling and milling compound machining centers, gear grinding machines, crankshaft grinders, turning, milling and boring compound machining centers, etc., especially in auto parts, wind turbines And other precision manufacturing industries are used in batch processing of parts.

3.the scope of application :

A3SS-XT7 double-switching filter system is often used in auto parts manufacturing, precision machining manufacturing, and mass intelligent production lines for precise flushing, cooling, lubrication, chip breaking and chip removal of workpieces and tools in batch intelligent production lines, prolonging the service life of tools and improving batch parts. machining accuracy and surface quality. It is loved by many precision machinery manufacturers such as various auto parts and wind turbines.

4.typical representative model meaning interpretation:

A3SS -025 /038-027/030-G-3-K- E6 - A -T1- XT7

A3SS -025 /038-026/050-G-4-K- E6 - A -T1- XT7

A3SS -025 /038-024/070-G-5.5-K- E6 - A -T1- XT7

A3SS -025 /050-036/030-G-3-K- E6 - A -T1- XT7

A3SS -025 /050-034/050-G-5.5-K- E6 - A -T1- XT7

A3SS -025 /050-032/070-G-7.5-K- E6 - A -T1- XT7

A3SS -025 /060-043/030-G-5-K- E6 - A -T1- XT7

A3SS -025 /060-040/050-G-5.5-K- E6 - A -T1- XT7

A3SS -025 /060-038/070-G-7.5-K- E6 - A -T1- XT7

...

Parts of the model are provided here, for more information, please consult AKP.

5. material configuration:

Part name	Material Material Code Name
screw	38CrMoAl, 16MnCrS5, etc. nitrided steel die steel
bushing	ceramics
pump body	QT200 QT250 QT450 Q235A
Bearing housing	QT450
end cap	QT450

6. Technical data and performance parameters:

flow	Capacity	10	Up to _	90	L/min
inlet pressure	Inlet pressure	ps	Up to _	7	Mpa
outlet pressure	Working Pressure _	pd	Up to _	3-15	Mpa
medium viscosity	Viscosity	V	Up to _	1-2 0 _	mm 2 /s
medium temperature	Fluid Temperature _	t	Up to _	80	°C
Rotating speed	Speed	n	Up to _	3 600	r/min
Filtration accuracy	filter			5-50	μm
overall volume	size	Max 1 500 x 600 x 1500 _			mm
control method	Control	PLC, terminal box, AKP control module

*The data here is for selection reference, if you have any questions, please consult A KP .

7. Advantages:

1. Multiple water tanks control the start and stop of the lift pump and the machine pump respectively, which is convenient for maintenance ;

2. Double liquid level controller can prevent the damage of high pressure pump and lift pump;

3. The double-barrel filters can be switched with each other, and can work without stopping for 24 hours, which is convenient for maintenance;

4. Filter barrel clogging alarm device , alarm light or alarm signal;

5. Vortex filter without consumables ;

6. The vortex filter can reduce the working pressure of the cartridge filter;

Keyword:

A3SS-XT7

interactive

processing

We could not find any corresponding parameters, please add them to the properties table

Longcheng Precision Forging customer site

The second workshop of Longcheng Precision Forging mainly produces engine injector bodies. The precision requirements of mass production parts are relatively high. After each shutdown, the engine must be warmed up for more than 20 minutes. The original site used a plunger pump system with a pressure of 70bar. Some models require a secondary pressurization of the cooling oil to reach the used 80bar. The original working noise is 150 decibels. Longcheng Precision Forging has reported that employees have been in noise pollution for a long time. The working environment is not conducive to the occupational health of employees. Kemet is required to replace the high-voltage unit, and the noise is controlled within 90 decibels. After contacting Kemet, our company provided a performance report and a noise level report. In August 2020, our company The performance and noise level of the central outlet high pressure unit were tested for the first time in Kmet. The test results show that the noise is 70 decibels, and the flow rate is 20 liters under the pressure of 80bar. The noise and performance are combined with the supply requirements.

More +

Longcheng Precision Forging customer site

The second workshop of Longcheng Precision Forging mainly produces engine injector bodies. The precision requirements of mass production parts are relatively high. After each shutdown, the engine must be warmed up for more than 20 minutes. The original site used a plunger pump system with a pressure of 70bar. Some models require a secondary pressurization of the cooling oil to reach the used 80bar. The original working noise is 150 decibels. Longcheng Precision Forging has reported that employees have been in noise pollution for a long time. The working environment is not conducive to the occupational health of employees. Kemet is required to replace the high-voltage unit, and the noise is controlled within 90 decibels. After contacting Kemet, our company provided a performance report and a noise level report. In August 2020, our company The performance and noise level of the central outlet high pressure unit were tested for the first time in Kmet. The test results show that the noise is 70 decibels, and the flow rate is 20 liters under the pressure of 80bar. The noise and performance are combined with the supply requirements.

More +

Products

High pressure machine tool cooling pump 

Spindle center water outlet system 

Lgnition oil pump 

Lubricating oil pump 

Other products 

Spare parts 

A3SS-XT7 double switching filter system

1. Product overview:

2. Product use function:

3.the scope of application :

4.typical representative model meaning interpretation:

5. material configuration:

6. Technical data and performance parameters:

7. Advantages:

Central water filtration system

High pressure machine tool cooling pump

Machine tool cooling pump

High pressure screw pump